Controls) - Buick Regal 2011 Owner's Manual

Bluetooth (Infotainment

Controls)

For information about how to
navigate the menu system using the
infotainment controls, see Operation
on page 7 4.
Pairing
A Bluetooth enabled cell phone
must be paired to the Bluetooth
system first and then connected to
the vehicle before it can be used.
See the cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls can be made using OnStar
Hands Free Calling, if available.
Refer to the OnStar Owner's Guide
for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
Pairing information:
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
The Bluetooth system links with
the first available paired cell
phone in the order the phone
was paired.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
Pairing should only need to be
completed once, unless changes
to the pairing information have
®
been made or the phone is
deleted.
To link to a different paired phone,
see Linking to a Different Phone
later in this section.
Infotainment System
Pairing a Phone
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Pair Device (Phone).
A four digit Personal
Identification Number (PIN)
appears on the display.
If the Add new GPS device
option is selected, the system
will start a search for Bluetooth
Hands free profile devices just
like if Add new Phone was
selected. The additional GPS
location feature which would
provide the vehicle's GPS
location through the Bluetooth
Serial Port Profile is not
available.
7-23