Replacing The Toner Container - Kyocera FS-1040 Operation Manual

Replacing the Toner Container

This section explains how to replace the toner container.
CAUTION Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move storage media and computer supplies (such as
floppy disks) away from the toner container. This is to avoid damaging media by the magnetism of toner.
KYOCERA Document Solutions Inc.
containers other than those designated as original Kyocera toner containers. For optimum performance, it is also
recommended to use only the Kyocera toner containers which are specifically intended for use in your country or
region. If the toner container for another destinations is installed, the printer will stop printing.
Note You do not have to turn printer power off before starting the replacement. Any data that may be processing in
the printer will be deleted if you turn the printer power off.
is not liable against any damages or problems arising from the use of toner
1
Open the front cover.
2
Pull out the toner container.
Note Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.
3
Take the new toner container out of the toner kit. Shake the new
toner container at least 10 times as shown in the figure in order to
distribute the toner evenly inside the container.
4-3
Maintenance