Maintenance Kit Replacement - Kyocera FS-1040 Operation Manual

Maintenance Kit Replacement

When the machine prints 100,000 pages, a message is printed indicating that the maintenance kit should be replaced. The
maintenance kit must then be replaced immediately.
To replace the maintenance kit, contact your service technician.
Contents:
• Drum unit
• Developer unit
• Waste toner box
• Feed roller
• Lower paper feed guide
• Transfer roller
4
Install the new toner container in the printer. Push in firmly until you
hear a "click" sound.
5
Close the front cover. Toner is replenished for about 4 seconds.
Note If the front cover does not close, check that the new
toner container is installed correctly (in step 4).
After use, always dispose of the toner container in
accordance with Federal, State and Local rules and
regulations.
4-4
Maintenance