Table of Contents
Advertisement
LOG PLAceMeNt
3. Hold Log #3 with the flat edge
down and 'fat' part of the log on
your left. Position the log on the
pins provided on the left side of
the burner and behind the fettle.
Make sure to have the narrow
end of the log over the extrusion
and behind the burner ports.
Figure 18
Figure 19
LG831
5. Hold Log #5 with the charred
portion on the left and point-
ing forward. Place the hole on
the bottom of the log on the
pin provided on the left rear
of the rear log support. Place
the right end on top of the key
provided on the top of log #4.
Figure 20
83D4009
Figure 18
LG831
VLI31 Log 4
Figure 20
Log #3
Log #4
LG830
VLI31 log #3
Log #5
LG832
VLI31 log 5
VLI31 Fireplace Insert
4. Hold Log #4 with the pointed
end of the log to the left.
Place the log on the key
provided on the top of the
frint of log # and position it
so the pointed end protrudes
through and rests on the
bottom of the fettle between
the middle two tines of the
fettle, with the back left of
the log resting on log #3.
Figure 19
LG83
1
Advertisement
Table of Contents
