York PACER 3503 Instruction Manual page 5

NOTE: DO NOT FULLY TIGHTEN THE BOLTS UNTIL YOU HAVE COMPLETED THE ASSEMBLY. NOTE: DO NOT FULLY TIGHTEN THE BOLTS UNTIL YOU HAVE COMPLETED THE ASSEMBLY.
4.
TAKE CARE
- DO NOT TRAP CABLE.
- DO NOT FULLY
TIGHTEN BOLTS YET.
5.
LOCK
DEVICE
6.
A.
B.
RIGHT
HANDLE BAR POST
C.
SHORT BOLT
RIGHT HANDLE
BAR POST
LEFT HANDLE
BAR POST
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
LEFT HANDLE
BAR POST
HANDLE BAR POST
MOUNTING TUBE
HANDLE BAR
PROTRUDES
INSERT THIS END FIRST
LONG BOLT
Insert the left handle bar post into the handle
bar post mounting tube and secure, using
four allen head bolts and star washers.
NOTE: TAKE CARE to ensure the wire does
not get trapped when you attach the left
handle bar post.
Do not fully tighten the bolts until the fully
handle bar post, front handle bar and
computer console have all been secured.
Insert the right handle bar post into the handle
bar post mounting tube and secure, using four
allen head bolts and star washers.
#5532-74
Release the lock handle fitted on the left
handle bar post with your left hand and
fold down the main frame to the floor gently
with your right hand.
Insert the handle bar into the handle bar post
as shown.
NOTE: One end of the handle bar protrudes
from the end of the foam grip, this end
must be inserted into the hole on the
right handle bar post first.
Secure the handle bar to the left handle bar
post by using, one long allen head bolt and
star washer.
#5532-84
Secure the handle bar to the right handle bar
post by using, one short allen head bolt and
star washer.
#5532-74
#5532-09
#5532-09
#55323-09
PACER 3503 / 4
X8
X1
X1
*