Assembly Instructions - York PACER 3503 Instruction Manual

WE RECOMMEND YOU HAVE SOMEONE ASSIST YOU IN LIFTING AND
ASSEMBLING YOUR PACER 3503 TREADMILL.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER
FOR YOU TO ASSEMBLE YOUR PACER 3503 TREADMILL.

ASSEMBLY INSTRUCTIONS

1.
Product may vary slightly from the item pictured.
Ask someone to help you remove all the parts and packaging materials on the top of your
PACER 3503 from the carton and place them on the floor carefully.
2.
MAIN
FRAME
2.
3.
MIDDLE
WIRE
PLUG
SENSOR
WIRE SOCKET
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
PACER 3503 / 3
GENERAL
Fold the main frame up and stand it in the base carton
as shown.
Ask someone to help you hold the treadmill on each
side and lift it out from the base carton carefully.
1.
BASE
CARTON
Rest the left handle bar post, with the locking device
LEFT HANDLE
fitted, beside the main frame and close to the handle
BAR POST
bar mounting tube carefully as shown.
Connect the sensor wire socket to the middle
LOCKING
wire plug protruding at the base of the left
DEVICE
handle bar post.
NOTE TAKE CARE NOTE: TAKE CARE to ensure the wires are connected
as tightly as possible.
*