D Receiving An Individual Call - Icom IC-M323 Instruction Manual

D Receiving an Individual Call
When an Individual Call is received:
➥ The alarm sounds for 2 minutes.
➥ "RCVD INDIVIDUAL CALL" pops up. The LCD backlight
may blink for 2 minutes, depending on the received Cat-
egory.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
[IGN]
➥ Push to ignore the Call and return to the normal operating
mode.
• The transceiver exits the DSC mode.
• The Call is stored in the Received Call Log.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
➥ Push to display the Received call information. (p. 58)
[ACK]
➥ Push to display the "INDIVIDUAL ACK" screen to re-
ply to the Call, and select the channel specified by the
calling station for voice communication, depending on
your situation. See page 30 for details of the Individual
Acknowledgement procedure.
When "INDIVIDUAL ACK" is set to "Auto ACK (Unable),"
the transceiver automatically replies to the Call. In that
case, both the TX and RX calls are stored in the Transmit-
ted and Received Call Logs.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
49