Procedure For Disassembly And Reassembly; Notes On Disassembly; Document Cover - Oki S900 Service Manual

Hide thumbs Also See for S900:

Table of Contents

S900

7.3

PROCEDURE FOR DISASSEMBLY AND REASSEMBLY

(1)

Clean the disassembly and assembly location.

(2)

Disconnect the power cable and remove the DC plug from the outlet before disassembly

and assembly.

(3)

Follow the disassembly and assembly procedures. Never loosen the screws of parts that

must not be disassembled.

(4)

Store the disassembled parts in a clean place to avoid loss.

(5)

After replacement, check the contacts and spare part mounting.

(6)

Assemble the parts in reverse order of disassembly procedure.

(1). As shown in the figure below, lift the document cover to remove the studs from the hinge holes. The

studs are loosely attached to the hinge holes to cover your original when it is a few inches high.

•

Note:

Before reinstalling the document cover, clean the document cover first.

Document cover removal

7-4

Document Cover

Table of Contents