Remote Control Function - Icom IC-FR5000 Series Sales Handbook

3. Open the Properties window and select the
Settings sheet then click ASCII Setup to open ASCII
Setup window.
4. Select Echo typed characters locally by clicking the
checkbox.
• Close the windows by click "OK" buttons.

Remote Control Function

Operation Operation Operation Operation
Receiving the PC command Receiving the PC command Receiving the PC command Receiving the PC command
When the Hyper terminal software starts, it is always
in receiving mode. With the PC and repeater
connected, turn the repeater power ON. The
following display appears.
[Memory ch=1], [Audible=off]
▒ NOTE: For details, see the PC Command
▒ Expansion (V2) specification sheet.
Start [STX] , V2 Command [*] , COMMAND, Stop [EXT]
Transmitting the PC command Transmitting the PC command Transmitting the PC command Transmitting the PC command
Below is an example of reading the revision number
from the radio.
COMMAND=GET, INFO, REV
Enter STX(CTRL+B) * GET, INFO, REV ETX(CTRL+C)
from PC then STX * NTF, INFO, REV, 2.0, $E73C EXT
will be returned from radio.
▒ NOTE: Revision number and check sum differs
▒ by each radio.
33