Table of Contents
Advertisement
The AV COMPU LINK remote control system allows you to operate JVC's video components (TV and VCK) through the unit.
This unit is equipped with the AV COMPU LINK-III,
which has added a function to operate JVC's video components through the video
components terminals. To use this remote control system, you need to connect the video component\ you want to operate, following the
diagrams below and the procedures on page 60.
l
Refer also to the manuals supplied with your video components.
CONNECTIONS
1: AV COMPU
LINK
Connection
-La==--
TV
CAUTION:
When connecting the TV with the
AV COMPU LINK remote
control
system, connect the unit to the
AV COMPU LINK III or
AV COMPU LINK EX
terminal.
DO NOT connect the unit to the
AV COMPU LINK RECEIVER/
AMP
terminal.
Notes:
l
When connecting
the unit and a TV with the AV COMPU LlNK EX termma/ by using a component
video cab/e, you cannot use Automatic
Selection
of TV's Input Mode (see page 60).
l
When connecting
the VCR only to this unit, connect it direct/y to the umt using cab/es wfth the monaural
mini-piugs.
CONNECTIONS
2: Video
Cable Connection
This unit is equipped with three types of the video terminals-composltc
video. S-video, and component video. and the signals coming into
this unit through one type of video terminals can output only through the terminal of the same type, So you nct'd to connect the VCK and TV
to this unit using one of the following two ways-CASE
I or 2:
l
When using the AV COMPU LINK remote control system, set the component video input correctly (see "Video output mode" on
page 22); otherwise, the correct input for this unit will not be selected on the TV.
---~
CASE 1
When connecting
the source equipment
to the unit through the S-video terminals,
connect this unit to the
TV's Video Input 1 terminal using S-video cables.
CASE 2
CASE 3
Source
Equipment
S-video cable
RX-DV5SL
S-wdeo cable i]
To Video Input 1
When connecting
the source equipment
to the unit through the composite
video terminals,
connect this
unit to the TV's Video Input 2 terminal (composite
video input) using composite
video cables.
Source
Equipment
Composite
wdeo cable
RX-DV5SL
Composite
video cable
To Video Input 2
When setting the video output mode of the built-in DVD player to "component,"
connect this unit to the
TV's Video Input 2 terminals
(component
video input) using component
video cables.
RX-DV5SL
Component
TV
video cable
1
~-
To Video Input 2
59
Advertisement
Table of Contents
