Ford EXPEDITION 2014 Owner's Manual page 294

Hide thumbs Also See for EXPEDITION 2014:

Table of Contents

Replacing Front Parking Lamp, Turn Signal, and Side Marker Bulbs

1. Make sure that the headlamp control is in the off position.

2. Open the hood.

2014 Expedition (exd)

Owners Guide gf, 2nd Printing, November 2013

3. At the back of the headlamp,

remove the two headlamp assembly

retainer bolts.

4. Slide headlamp assembly forward

and off the retaining tab to expose

the back of the headlamp assembly.

5. Rotate the bulb socket

counterclockwise and remove from

the lamp assembly.

6. Carefully pull the bulb out of the

socket and push in the new bulb.

7. Install the bulb socket into the

lamp assembly and rotate clockwise.

8. Install the headlamp assembly

and secure with two retainer bolts.