Ford EXPEDITION 2014 Owner's Manual page 26

Hide thumbs Also See for EXPEDITION 2014:

Table of Contents

• Place the vehicle seat upon which the child seat will be installed in

the upright position.

• Put the safety belt in the automatic locking mode. See Step 5. This

vehicle does not require the use of a locking clip.

Perform the following steps when installing the child seat with

combination lap and shoulder belts:

Note: Although the child seat illustrated is a forward facing child seat,

the steps are the same for installing a rear facing child seat.

2014 Expedition (exd)

Owners Guide gf, 2nd Printing, November 2013

Child Safety

1. Position the child safety seat in a

seat with a combination lap and

shoulder belt.

2. Pull down on the shoulder belt

and then grasp the shoulder belt

and lap belt together.

3. While holding the shoulder and

lap belt portions together, route the

tongue through the child seat

according to the child seat

manufacturer's instructions. Be sure

the belt webbing is not twisted.