Ford EXPEDITION 2014 Owner's Manual page 143

142
Recalling Saved Memory Positions
To recall position 1 settings, press and release memory button 1. The
memory features will move to the saved memory 1 position.
You can also recall the memory positions when you:
• press your remote control transmitter unlock button (if the remote
control is programmed to a memory position) or,
• enter a valid Securicode personal entry code that is programmed to a
memory position.
If the easy entry and exit feature is on, the mirrors and pedals will move
to the programmed memory position and the seat will move to the easy
entry position. The seat will move to the driving memory position when
the ignition is activated.
You can recall a programmed memory position:
• in any gearshift position if the ignition is not on.
• only in position P or N if the ignition is on.
Easy Entry and Exit Feature (If Equipped)
If you enable the easy entry and exit feature, it automatically moves the
driver's seat 2 inches (5 centimeters) rearward when the transmission is
in park (P) and the key is removed from the ignition.
Note: If the seat is located less than 2 inches (5 centimeters) from the
rear of the seat track, the seat travel will be less than 2 inches
(5 centimeters) rearward.
The driver's seat will return to the previous position when the key is put
in the ignition.
Enable or disable this feature through the information display. See the
Information Displays chapter.
2014 Expedition (exd)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
Seats