Ds3 Lbo Wayside Ds1 Connections (J201 In And J202 Out) - Alcatel MDR-8000 User Manual

DS3 INPUTS
FUNCTION
DS3 LINE 1
DS3 LINE 2
DS3 LINE 3
3.9

DS3 LBO WAYSIDE DS1 CONNECTIONS (J201 IN AND J202 OUT)

Wayside DS1 is an option in the MDR-8000 DS3 radios. This option provides 1 DS1 for
each equipped DS3. To activate the wayside channels requires a small circuit board, called
ELMC option key, that plugs onto the controller module. The protection of the wayside
channels follows the protection scheme of the radio configuration. In other words, if the
radio is hot-standby the wayside channels are hot-standby. The channels are point to point
just as is the payload traffic. They are independent of the traffic and reside in the overhead
channels. The advantage of the wayside DS1 is the ability to drop 1 to 3 DS1's without hav-
ing to add a 1:3 muldem to access the traffic. Refer to Table 3 - 4 for ELMC option key
requirements for remote monitoring/controlling wayside DS1s.
Table 3 - 4 Wayside DS1 Performance and Control
ELMC Option Key
ELMC Option Key
Table 3 - 3 DS3 LBO Connectors
BNC CONNECTOR
J22
J24
J26
PART NO. FUNCTION
695-5647-019 Required to enable WS DS1 lines for remote way-
side DS1status
695-5647-020 Required to enable WS DS1 lines for remote way-
side DS1status + remote provisioning and down-
loading
DS3 OUTPUTS
FUNCTION
DS3 LINE 1
DS3 LINE 2
DS3 LINE 3
BNC CONNECTOR
J21
J23
J25
3-13