Dome Camera User Menu Settings; Camera Settings - Samsung SPD-3000 User Manual

Functional Description

Dome Camera User Menu Settings

• Execution of OSD Menu :
After checking if the camera is in manual operation mode, press the OSD Menu
key or 1+MENU (SCC-16 Model). The following commands are displayed on the
monitor screen.
• Main Menu
The selection key moves up and down. Press the
Main Menu
Camera Setting execution key switch on the selected menu to
Sequence Setting
change the setup menu. Press the ESC key to exit
P/T Setting
the OSD Menu.
OSD Setting
Alarm Setting
Initialize
Status
1) Camera Setting
Select the Camera Setting on the Main Menu screen to control camera settings
• Camera Setting Menu
Camera Setting
Focus
White Balance ATW(O)
Exposure
Back Light OFF
AGC MIDDLE
SSNR MIDDLE
Day & Night COLOR
Others
34
SPEED DOME CAMERA
Focus
Focus Mode ONE SHOT AF
Zoom Tracking
Digital Zoom OFF
User's Manual
FOCUS
In Focus menu, you can set up the focus mode among Auto, Manual or One
Shot AF.
Focus Mode
Auto : The camera adjusts the focus automatically while monitoring the
screen continuously in the auto mode. In the auto focusing mode,
zoom key operation is not recognized as the input of the focus key.
Manual : In the manual mode, users can adjust the camera focus manually.
One Shot AF : Only when the camera does not move, it turns into the auto mode. It
is the same as the manual mode.
Zoom Tracking
Mode: When you select ON, the Focus function is executed when the Zoom function
is on. When you select OFF, the Focus function is not executed even when
the Zoom function is on.
Speed: Fast will speed up the Zoom. Slow will slow down the Zoom.
Digital Zoom
Magnification of the Digital Zoom can be selected among Off, 2X~10X.
*It is recommended that the Digital Zoom should be set up before the preset operation.
Notes
Digital Zoom
•As the digital zoom magnification increases, the image quality is lowered.
Auto-focus
Auto-focus may not function normally under the following conditions.
•
- When the light level in the surveillance area is low
- When the slow-shutter works
- When the amplification is increased
- When the light level in the surveillance area is excessively high
- When the objects in the long and short distance are under the same surveillance area
- When there is no contrast (white and black) in the object (e.g. sky or wall)
- When the thin horizontal line is captured
SPEED DOME CAMERA
35
User's Manual