Table of Contents
Advertisement
Installation
3) Indoor and Outdoor Housing (STH-330PI, STH-330PO)
This housing is used to install the speed dome camera on the indoor or outdoor
wall or ceiling. (For the indoor type, the fan and heater are excluded.)
4) Wall Type Mount (STB-270PW)
This item is used to install the indoor or outdoor housing for speed dome on the
wall.
5) Ceiling Type Mount (STB-496PP)
This item is used to install the indoor and outdoor housing
for speed dome on a concrete ceiling.
26
SPEED DOME CAMERA
User's Manual
Camera Installation (outdoor Housing)
1. Fasten the ceiling mount on the ceiling.
2. Pull outside of the housing the safety wire fastened to the outdoor housing.
3. Connect the fan heater PCB cable inside the
housing to the camera holder connector.
4. Match the arrow sign marked on the camera
holder to the arrow marked inside the housing
and then install the camera holder in the
housing.
SPEED DOME CAMERA
outside
inside
27
User's Manual
Advertisement
Table of Contents
