Table of Contents
Advertisement
Functional Description
P1
P2
P3
Area5
Area6
Area Setting
Area7
Area8
P/T
Mask1
Setting
Mask2
Area Masking
Mask3
Mask4
Prop. P/T
ON / OFF
Digital Flip
ON / OFF
Camera ID
ON / OFF
Camera Name
Edit ON / OFF
Preset Number
ON / OFF
OSD
Preset Name
Edit ON / OFF
Setting
Sequence Status
ON / OFF
Area Name
ON / OFF
PTZ Position
ON / OFF
Language
English/Chinese
Alarm Enable
ON / OFF
Alarm1
Alarm2
Alarm Input
Alarm2
Alarm2
Setting1
Setting2
Alarm
Setting
Timer1
Alarm Out
Timer2
Out Off1
Out Off2
MD Dwell Time
ON / OFF
Power On Reset
Cancel Execute
Factory Default Set
Cancel Execute
Camera Default Set
Cancel Execute
Auto Refresh
OFF, 1~7Days
32
SPEED DOME CAMERA
P4
Defaults
Area Name
Position
ON/OFF
Position
ON/OFF
ON
ON
ON
ON
ON
OFF
OFF
English
OFF
NC/NO/COM
1~4(Priority)
Preset/Group/Tour
A.Pan/Trace
1-4, MD
1-4, MD
1-59(Sec)
1-59(Min)
1-59(Hour)
1-59(Sec)
1-59(Min)
1-59(Hour)
1-59(Sec) / 1-59(Min)
30sec
OFF
User's Manual
Notes
• Preset setting is only possible on the OSD menu or using the controller.
Symbol Description
1. Auto Run in the Sequence Mode
- "A" symbol is flashing on the right top of the screen.
2. Motion Stabilization Stand-by Operation
- "D" symbol is flashing on the right top of the screen.
3. Alarm operation
- " "symbol is flashing on the right top of the screen.
4. Alarm Input #1, 2, 3, 4 Sensor Operation
- " ", " ", " " and " " symbols are flashing on the right top of the screen.
5. Alarm Output #1, 2 Sensor Operation
- " " and " " symbols are flashing on the right top of the screen.
6. Motion Detect Operation
- "Man Icon" is flashing on the right top of the screen.
7. When there are sub menus under the selected OSD menu
- Numbers are displayed in white colour like
8. When there is no sub menu under the selected OSD menu
- Numbers are displayed in black colour like " " on the right top of the screen.
SPEED DOME CAMERA
on the right top of the screen.
33
User's Manual
Advertisement
Table of Contents
