Connecting The Telephone Cable; Connecting The Mains Cable; Initial Installation; Entering Number - Sagem FAX 3150 User Manual

Hide thumbs Also See for FAX 3150:
Table of Contents

Advertisement

5 Only after completely pull off the protection strip lo-
cated on the left side of the cartridge.
Once you have removed the protection strip, do
not shake the toner cartridge any more. Other-
wise, it is possible that toner dust will be released
into the air.
6 Place the toner cartridge into your device. The cartridge
should snap securely into position.
7 Close the cover. Make sure that the cover snaps securely
into position on both sides.

Connecting the Telephone Cable

Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Telefonkabel anschließen
Extension
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 30).

Connecting the Mains Cable

Power Type at Setup Location
Check whether the power type of your machine (in-
dicated on the type plate) matches the power type
available at the setup location.
Connecting the Power Cable
Insert the power cable into the connection located on the
rear side of the machine. Connect the power cable to the
electrical socket.
Netzkabel anschließen

Initial Installation

Initial Installation
After you connect your device to the mains, the initial in-
stallation commences.
Selecting the Country
Setting the Country Correctly
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
1 Press OK.
2 Use [ to select the country in which you are operat-
ing the device.
3 Confirm twice with OK.

Entering Number

Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Your Number
1 Enter your number. Using # or * you can enter a
plus sign.
2 Confirm using OK.

Entering Name

1 Enter the name using the keys (A—Z).
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters.
2 Confirm with OK.
Entering the Date and Time
1 Enter the date (two digits for each field), for example
31¦05¦25 for May 31th, 2025.
2 Enter the time, e.g. 14 00 for 2 pm.
3 Confirm with OK.
EN
5

Advertisement

Table of Contents
loading

Table of Contents