Transport Position - Husqvarna 327HE3X Operator's Manual

(327HDA65)
• Undo the knob.
• Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
• Tighten the knob.
WARNING! Do not hold the cutting head
!
when you adjust the angle. The blades
are sharp and you could easily cut
yourself.
18 – English
WORKING TECHNIQUES

Transport position

(327HE4)
Once the work has been completed fold the cutting unit
back against the shaft to simplify transport and storage of
the hedge trimmer.
1 Turn off the engine.
2 Loosen the knob on the shaft (clockwise).
3 Grip the handle on the cutting unit and angle the
cutting unit upwards. At an angle of 90 degrees there
is a stop position. To pass the stop position, pull out
the lock button.
4 Fold down the cutting unit against the shaft.
5 Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit
in this position.