'" _Ill ..-' ..._ .-
~:
Setting the time zone
To set the time zone:
1
Press M~U and open the
Prefer
menu.
2
Highlight
Time Zone.
3
Press
~
or
@
to select Pacific, Alaska, Hawaii, Eastern,
Central and Mountain.
Pacific-+ Alaska-+ Hawaii -+ Eastern -+ Central-+
Mountain -+ Pacific
Note: After you change the Time Zone setting, when you
press
1' 1 :>0,
you will see that the program duration has been
changed. For more details on
1' 1 :>0,
see" To display TV
status information using INFO" section on this page.
Displaying TV status information
To display TV status information using RECALL:
Press
AE~LL
on the remote control.
The following information will display (if applicable):
• Current input
(Video 1, Video
2, etc.)
• Channel number (if in ANT mode)
• Channel label (if set)
• Digital signal strength indicator (bar graph in top right
comer of box)
• Stereo or SAP audio status
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status
To close the RECALL screen:
Press
El)T
on the remote control.
I
42
To display TV status information using INFO:
Press 1' 1 :>0 on the remote control.
The following additional information will display for off air
digital channels (if applicable):
• Title
• Duration
• Detailed description
To close the Information screen:
Press
E' t J
on the remote control.
Understanding the auto power off
feature
I
The TV will automatically tum itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.
Understanding the last mode
I
memory feature
I
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the
TV when the power is resupplied.
Note: You should unplug the TV's power cord if it is possible
that you will be away from the TV for an extended period of
time after the power is restored.