Connecting A Dvd Player With Colorstream; Video), A Vcr, And A Satellite Receiver - Toshiba 26AV500U Owner's Manual

Connecting a DVD player with ColorStream® (component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream® (component video) inputs.
From antenna
IJ
Satellite receiver with component video
DVD player with component video
You will need:
• coaxial cables
• standard A/V cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. 00 not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- If you have
a
mono VCR, connect UMONO on the TV
to your VCR's audio out terminal using the white audio
cable only
• standard audio cables
• component video cables
- You can connect the component video cables (plus
audio cables) from the OVO player or satellite receiver to
either set of ColorStream terminals on the TV (HD 1 or
HD 2). The ColorStream HD 1 and HD 2 terminals can
be used with Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems. A 1080i signal will provide
the best picture performance (1080p is not supported).
- If your OVO player or satellite receiver does not have
component video, connect
a
standard AN cable to
VIDEO 2 on the side panel. If your OVO player has HoMI
video, see page 17.
To view antenna or Cable channels:
Select the ANT video input source on the TV. *
To view the DVD player:
Tum ON the DVD player. Select the ColorStream HD 1
video input source on the TV. *
To view satellite programs using the component
video connections:
Tum on the satellite receiver. Select the ColorStream HD 2
video input source on the TV.*
To view the VCR or view and record antenna chan-
nels:
Tum ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a DVD:
Tum ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD 1 video input source on the TV*
to view the DVD.
*
To select the video input source, press INPUT on the remote
control
(~page
21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.