Ignition & Usage; Ignition; To Extinguish - Weber 300 Owner's Manual

Note: Summary ignition instructions are posted on the cart leg under the control knobs.
Note : The ignition system ignites the burners with a spark from the igniter electrode
inside the ignition chamber. You generate the energy for the spark by pushing the
ignition button until it clicks.
A) Open the lid .
B) Make sure all burner control knobs are turned OFF
clockwise to ensure it is in the OFF position.)
C) Turn the gas on by turning the cylinder valve counterclockwise
D) Push in the large control knob for the outside burner and turn it to START/HI
E1) Q300 with push-button ignition: Push the ignition button, so that it clicks and ignites
the burner . Repeat if necessary.
OR
E2) Q320 with electronic ignition: Push the ignition button
continually until burner ignites.
F) Check that the burner is lit by looking down through the cooking grate
should see a flame.
G) After the outside burner is lit, you can turn on the inside burner. Push in the small
control knob and turn it to START/HI
the outside burner.
Push in and turn each burner control knob clockwise to the OFF position. Turn gas
supply OFF at the source.
28
IGNITION & USAGE
. (Push each knob in and turn
.
. You will hear it click
. You
. The inside burner will then be ignited by
1
5
6
2
.
7
3
3
8
5
6
4