Speakers - HP EliteBook 8570w Maintenance And Service Manual

Speakers

Description
Speaker kit
Before removing the speakers, follow these steps:
IMPORTANT:
and replacement.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the following components:
a. Hard drive (see
b. Upgrade bay device (see
c. Keyboard (see
d. Top cover (see
e. Audio/USB 3.0 board (see
Remove the speakers:
1. Position the computer right-side up, with the front toward you.
2. Remove the display latch:
a. Remove the spring (1) from the display latch lock.
b. Remove the three Phillips screws (2) from the display latch lock.
c. Push down the button (3) in the front right corner of the display latch lock.
110 Chapter 4 Removal and replacement procedures
Make special note of each screw and screw lock size and location during removal
Battery on page
Service door on page
Hard drive on page
Upgrade bay device on page
Keyboard on page
Top cover on page
Audio/USB 3.0 board on page
54).
60).
72).
77).
81).
87).
Spare part number
652669-001
106).