Possible causes
Improper loading.
•
Wrong program selection.
•
Spray arms are not
•
turning.
Clogged filters.
•
Filters are not placed in
•
their proper positions.
Spray arm nozzles are
•
clogged.
Overloaded racks.
•
Detergent is moist or
•
clumping in box.
Too little detergent.
•
Too little rinse aid.
•
The lid of the detergent
•
dispenser remained open.
Washing cutlery with worn
•
surface quality.
Possible causes
Wrong program selection.
•
The dishes are not clean
How to fix these problems
Load the dishwasher as suggested in this
•
manual.
Select a program that washes at a higher
•
temperature or takes a longer amount of
time.
Check if the spray arms are blocked from
•
moving freely.
Clean all filters as described in this
•
manual.
Check if all filters are placed in their proper
•
positions.
Clean the spray arms as described in this
•
manual.
Do not overload the racks.
•
Store detergents in a dry location. Close
•
the lid of the container securely.
Increase the amount of the detergent as
•
per the program table.
Increase the amount of rinse aid and/or
•
refill the rinse aid dispenser.
Always ensure that you close the detergent
•
dispenser lid after pouring in the detergent.
Cutlery of this type is not suited to
•
dishwashers.
Tea, coffee or other stains
How to fix these problems
Select a program that washes at a higher
•
temperature or takes a longer amount of
time.
24
USA