Possible causes
The dishes are pre-
•
washed by hand with
a large amount of dish
detergent.
Rinse aid has accidentally
•
leaked into the machine.
The cover of the rinse aid
•
dispenser is not closed
securely.
Possible causes
Clogged filters.
•
Drain hose kinked or
•
clogged.
12. TECHNICAL FEATURES
Load capacity
Permissible water pressure
Electrical connection
Total power
Heater power
Notice :
Because we continually strive to improve our products, we may change our specifications
and design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.
Foam
How to fix these problems
Dishes do not need to be pre-washed.
•
Coarse dirt may be removed with a
dishcloth, or you may hold the dishes
under running water.
If rinse aid has been spilled during refilling,
•
remove the aid using a paper cloth or
sponge.
Always take care to ensure that the
•
lid is closed after refilling the rinse aid
dispenser.
Water remains inside the machine
after the rinse cycle
How to fix these problems
Clean all filters as described in this
•
manual.
Ensure that the drain hose is properly
•
placed and open.
12 place settings
4.35 - 145 psi (0.3 - 10 bars)
120 V (volts), 12 A (amps), 60Hz (hertz)
1400 W (watts)
1240 W (watts)
29
USA