Possible causes
Improper loading
=
Insufficient rinse aid supply
=
Dishes are removed too soon
=
Wrong program selection
=
Washing cutlery with worn surface.
=
Possible causes
Improper loading.
=
Wrong program selection.
=
Spray arms are not turning.
=
Clogged filters.
=
Filters are not placed in their proper positions.
=
Spray arm nozzles are clogged.
=
Overloaded racks.
=
Detergent is moist or clumping in box.
=
The dishes are not dry
How to fix these problems
Load the dishwasher as suggested in this manual.
=
Increase the dosage amount of rinse aid and/or
=
refill the rinse aid dispenser.
Do not empty your dishwasher immediately after
=
washing. Open the door slightly so that the steam
can escape. Begin with unloading the dishwasher
when the dishes are only hand warm. Empty
the lower rack first. This prevents water from
dripping off dishes in the upper rack.
In short period programs, the wash temperature
=
and therefore the cleaning performance is lower.
Choose a program with a longer washing time.
Evaporation of water is more difficult with these
=
items. Cutlery or dishes of this type is not suited
for dishwashers.
The dishes are not clean
How to fix these problems
Load the dishwasher as suggested in this
=
manual.
Select a program that washes at a higher
=
temperature or takes a longer amount of time.
Check if the spray arms are blocked from
=
moving freely.
Clean all filters as described in this manual.
=
Check if all filters are placed in their proper
=
positions.
Clean the spray arms as described in this
=
manual.
Do not overload the racks.
=
Store detergents in a dry location. Close the
=
lid of the container securely.
19