Trouble Shooting - Blomberg DW 24100 B Use And Care Manual

Hide thumbs Also See for DW 24100 B:
Table of Contents

Advertisement

11. TROUBLE SHOOTING

What if the dishwasher will not run :
Is the machine plugged in?
Are all fuses operative?
Is the water supply fully turned on?
Is the dishwasher door closed securely?
Have you pressed the On/Off button?
What if the dishwasher starts but fails to circulate water within 5 seconds :
Cancel the program by pressing the Start/Pause button for 5 seconds. See section 6. or
Quick Reference Guide.
What if the door will not stay down in open position :
Adjust door tentioners (wooden door models only, see Installation Manual)
What if the dishwasher produces poor cleaning results :
"Follow the instructions given in the following pages"
Possible causes
Improper loading
Insufficient rinse aid
supply
Dishes are removed too
soon
Wrong program selection
Washing cutlery with
worn surface.
The dishes are not dry
How to fix these problems
Load the dishwasher as suggested in this
manual.
Increase the dosage amount of rinse aid
and/or refill the rinse aid dispenser.
Do not empty your dishwasher immediately
after washing. Open the door slightly so
that the steam can escape. Begin with
unloading the dishwasher when the dishes
are only hand warm. Empty the lower rack
first. This prevents water from dripping off
dishes in the upper rack.
In short period programs, the wash
temperature and therefore the cleaning
performance is lower. Choose a program
with a longer washing time.
Evaporation of water is more difficult with
these items. Cutlery or dishes of this type
is not suited for dishwashers.
23
USA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents