Programming The Atis Code - Standard Horizon Eclipse DSC+ GX1100E Owner's Manual

11 PROGRAMMING THE ATIS CODE

A ten digit ATIS code is used for an automatic transmitter identification system in
inland water ways in various countries in Europe. The GX1100E transmit the ATIS
code at the end of every transmission, which is monitored by marine coast sta-
tions. Please contact your dealer for information on how to obtain an ATIS Code.
A User ATIS code can be input only once. Therefore, please be care-
ful not to input the incorrect ATIS code. If the user needs to change
the ATIS code after it has been entered, the radio will have to be returned
to Factory Service.
1. Press and hold down the [ CALL ( MENU )] key
until the "SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU
SETUP MENU
2. Press the [ ( DOWN )] key repeatedly until
the "ATIS SETUP ATIS SETUP" menu appears.
ATIS SETUP ATIS SETUP
ATIS SETUP
3. Press the [ ENT ] key, then select "ATIS CODE
ATIS SETUP" menu with the [ ( UP )] /
in the "ATIS SETUP
ATIS SETUP ATIS SETUP
ATIS SETUP
[ ( DOWN )] keys.
4. Press the [ ENT ] key. The display will show a
series of dashes.
5. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect the first number of your ATIS code, then
press the [ ENT ] key to step to the next num-
ber.
6. Repeat step 5 to set your ATIS code (up to
ten digits).
7. When finished programming the number,
press and hold the [ ENT ] key. A confirma-
tion message appears on the display. Set
your ATIS code again, then press and hold
the [ ENT ] key.
8. Press the [ ENT ] key to store the number in
memory and return to the "ATIS SETUP
menu.
9. Press the [
"GROUP GROUP" appears in the menu, then press
GROUP GROUP GROUP
the [ ENT ] key.
10.Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect the "mode" (INT, USA, or CAN) on which you
wish to enable the ATIS, then press the [ ENT ] key.
GX1100E
WARNING
ATIS CODE" ATIS CODE ATIS CODE
ATIS CODE
ATIS SETUP ATIS SETUP" ATIS SETUP
ATIS SETUP
( DOWN )] key once and
Page 57