Transmitting A Dsc Position Report Call - Standard Horizon Eclipse DSC+ GX1100E Owner's Manual

9.9.2 Transmitting a DSC Position Report Call

Pre-Programmable Calling
1. Press the [ CALL ( MENU )] key. The "DSC
MENU" will appear in the display.
MENU MENU
MENU MENU
2. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect the "POS REPORT
POS REPORT POS REPORT
POS REPORT POS REPORT".
3. Press the [ ENT ] key, then press the [
[ ( DOWN )] keys to select the category
("ROUITINE ROUITINE" or "SAFETY
ROUITINE ROUITINE
ROUITINE
port Call.
4. Press the [ ENT ] key to show the Position
Request Directory. This directory uses the
Individual Directory information.
5. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect a "Individual" you want to send your po-
sition to, then press the [ ENT ] key.
6. Press the [ ENT ] key again to send your po-
sition to the selected vessel.
7. Press the [ CLR ( WX )] key to return the display to
the radio operation mode display.
Manual Calling
You may enter an MMSI number manually to call without Setting up the Indi-
vidual / Position Call Directory.
1. Press the [ CALL ( MENU )] key. The "DSC
MENU" will appear in the display.
MENU MENU MENU MENU
2. Press the [
select the "POS SREPORT
POS SREPORT POS SREPORT
POS SREPORT". POS SREPORT
3. Press [ ENT ] key to show the Position Send direc-
tory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the [
MANUAL", then press the [ ENT ] key.
select "MANUAL
MANUAL MANUAL
MANUAL
5. Enter the MMSI number (nine digits) which
you want to contact.
Press the [
through numbers, 0-9. To enter the desired num-
ber and move one space to the right, press the [ ENT ] key. Repeat this
GX1100E
SAFETY") for the Position Re-
SAFETY SAFETY
SAFETY
( UP )] / [ ( DOWN )] keys to
( UP )] / [ ( DOWN )] keys to
( UP )] / [ ( DOWN )] keys to scroll
DSC DSC DSC DSC
( UP )] /
DSC DSC DSC DSC
Page 49