Connecting The Power Cord; Figure 7 – Power Connection - AMT Datasouth Fastmark 600 Series User Manual

Connecting the Power Cord

1. Make sure that the source voltage matches the input voltage of the power adapter.
Caution: Incorrect source voltage could cause damage to the printer and/or the
power adapter.
2. Ensure the printer power switch is Off, "O".
3. Connect the power plug on the back of the printer.
4. Connect AC power plug to a suitable AC source.
5. Connect either a Centronics Parallel or RS-232 Cable.
Fastmark 600 Series User's Guide
Figure 7 – Power Connection
17