Appendix A: General Specifications - AMT Datasouth Fastmark 600 Series User Manual

Appendix A: GENERAL SPECIFICATIONS

Specification
Print method
Resolution
Maximum print width
Maximum print length
Maximum print speed
Onboard Memory
CPU type
Media Information
Maximum Width
Maximum Roll size (OD)
Minimum Core size (ID)
Media Sensing method
Ribbon Information
Maximum Width
Minimum Width
Maximum Roll size (OD)
Typical ribbon Length
End of Ribbon Method
Label indexing
Interface
User Interface
Dimension
Electrical
Operating temperature
Windows driver
Printer emulation
Fastmark 600 Series User's Guide
Fastmark 602 PAL
Type Roll-Feed, Die-cut Continuous, Fan-fold, tags, ticket, plain
paper, fabric, wristband
Feed Direction Wound-In preferred, will accept Wound-Out
4.3 inches (110 mm)
Minimum Width 0.6 inches (15mm)
Thickness 0.0025 inches to 0.01 inches (0.0635mm to 0.254mm)
6 inches (152mm)
1 inch (25mm), optional adapter for 3 inch ID core
Reflective Sensor
Type Wax, Wax/Resin, Resin
Wind Method Coating Wound-In
4.3 inches (110 mm)
2 inches with Core Adapter
2.67 inches (68mm)
Core size (ID) 1 inch (25mm)
Core type Two Slots 180 degree apart
Resin 300m, Wax 360m
No motion of Sensor Wheel on Supply ribbon
Gap, Black Bar, Continuous
RS-232 Serial (9 pin female), Centronic type Parallel, External
Network Adapter, External USB to Parallel adapter
3 buttons (Feed, Pause, Cancel)
3 LED indicators (Ready, Media, Ribbon)
Height: 8.5 inches
Width: 9.25 inches
Depth: 12.5 inches
Weight: 9.3 lbs
Auto Voltage Sensing Power Supply
90 to 250 VAC
40° F to 100° F
10 to 90% humidity non condensing
Available for Windows 95/98, XP/2k, NT
PAL, ASCII, Display, HEX
Direct Thermal or Thermal Transfer
203 dpi
4 inches
0.4 to 80 inches
2 to 6 ips
2mb DRAM
1mb FLASH ROM
32 bit RISC microprocessor
Fastmark 603 PAL
300 dpi
0.4 to 54 inches
2 to 5 ips
81