Table of Contents
Advertisement
Setup Feature and Value List
FEATURE NAME
Media Type
Media Sensing
Calibrate Media
Sensor Threshold
Media Length
Media Width
Present Distance
Backfeed
Present Sensor
Fastmark 600 Series User's Guide
VALUE RANGE
[ Direct Thermal, Thermal Transfer ]
[Gap, Continuous, Black Bar ]
(Form Length / Gap Length)
automatically displayed and are not
adjustable from this feature.
[ 0-255]
[ 0.25 - 12.00] (Inches)
[ 0.5 - 4.05] (Inches, 602)
[ 0.5 - 4.25] (Inches, 603)
[ 0.00 - 1.00 ] (Inches)
[Enable, Disable]
[Enable, Disable]
DESCRIPTION
Set to Thermal Transfer if ribbon is used.
Set to match media sensing method.
Click the Enter button to initiate the media
calibration. The detected media length and
Gap are displayed. Not required when
Media Sensing is set to Continuous
Automatically set by Calibration mode.
The lower the number the less sensitive the
Sensor is.
Automatically set by Calibration mode.
Manual change of this values will reflect in
the Calibrate Media feature.
Set to media width used.
The Present Distance is the distance the
printer will push the label out of the printer
after printing a label. Typically this feature
is used to adjust to position of the end of a
label to the tear bar or the Peel Location
when the Peel and Present option is
installed. After setting this feature the
printer will feed to the top of the next label.
This feature controls the back feed of
media.
When enabled, the printer will reverse the
label the distance indicated in the Present
Distance feature.
When Disabled, the printer will not reverse
the label and begin printing immediately at
the current label position. Note: This will
result in no new printing on the portion of
the label presented by the Present Distance
feature.
This feature controls the operation of the
optional present sensor. When installed
and enabled, the printer suspends printing
after each label until it is removed by the
operator. This is typically used when the
peel and present option is installed but
could also be used with the tear bar.
38
Advertisement
Table of Contents
