Table of Contents
Advertisement
3. From the "IP Address" tab of the "TCP/IP Properties" window, select either the Obtain an
IP address Automatically or Specify an IP Address option, depending on your network
setup. If you select Specify an IP address, type the IP Address and Subnet Mask in the
spaces provided. Consult with your network administrator to determine which option best
suits your individual needs.
4. The "Gateway" tab allows you to add or remove gateways. Consult with your network
administrator to determine the appropriate addresses for your individual needs.
•
To add a new gateway, type the address in the New gateway field and click Add.
The new gateway will appear in the Installed gateways list.
•
To remove a previously installed gateway, highlight the entry to be removed in the
Installed gateways list and click Remove. The gateway will no longer appear in the
Installed gateways list.
5. Click OK from the "TCP/IP Properties" window.
6. The "Network" window will reappear. Click OK to end the modifying TCP/IP options
session.
7. If you have made changes to TCP/IP properties, you will be asked to restart/reboot your
PC. Click Yes, and your PC will restart.
Chapter 6: Modifying TCP/IP Options – LAN USB Driver
ADSL/USB Modem by Multi-Tech Systems, Inc.
23
Advertisement
Table of Contents
