Multitech MTD100U User Manual page 22

External adsl usb modem

Hide thumbs Also See for MTD100U:

Table of Contents

Chapter 6: Modifying TCP/IP Options – WAN USB Driver

4. From the "Server Types" tab of the "Multi-Tech Dial-Up PPP Connection" window, select

TCP/IP (marked with a check in the box to the left) and click TCP/IP Settings.

5. The "TCP/IP Settings" window is used to modify the IP address, Name Server addresses

and/or default gateway as follows:

•

Change the IP address to a user defined address by selecting Specify an IP address

(click inside the circle to the left of it) and typing the address in the space provided

•

Change the Name Server addresses to user defined addresses by selecting Specify

name server addresses (click inside the circle to the left of it) and typing the

addresses in the spaces provided

•

Change the default gateway by leaving the box blank to the left of Use default

gateway on remote network.

Click OK.

6. The "MultiTech ADSL Connection" window will be redisplayed. Click OK to end the

modifying TCP/IP options session.

ADSL/USB Modem by Multi-Tech Systems, Inc.

Table of Contents