Renaming A Zoneplayer - Sonos ZonePlayer ZP100 User Manual

3-20
Click the Advanced tab.
2.
Select another wireless channel from the Wireless Channel list, and click OK.
3.
It may take several seconds for the switch to take effect. If you have music playing, a
short music dropout will occur during the wireless channel change.
Line-in encoding
If you have line-in music sources attached to a ZonePlayer, line-in encoding determines
how the Sonos Digital Music System will encode the audio coming in from these
sources. Compressed encoding is the high-quality system default. For the highest
quality sound you can select Uncompressed encoding (this selection requires more
network bandwidth than compressed audio).
From the File menu, select Preferences.
1.
Click the Advanced tab.
2.
Select Compressed or Uncompressed from the Line-In Encoding list, and click
3.
OK. When Compressed is selected, you will notice a slight delay before the music
starts to play.
Adding More ZonePlayers
You can add more ZonePlayers to your Sonos Digital Music System any time by
→
selecting Zones Zone Setup
placement and setup of your new ZonePlayer(s).

Renaming a ZonePlayer

If you name a ZonePlayer incorrectly, or if you move your ZonePlayer to another room,
you can rename it to suit your preference by selecting Zones
Highlight the ZonePlayer you wish to change, and click Settings. From the Zone
Name tab, you can either select a name from the drop-down list, or type a different
name in the Zone Name field.
→
Add. Turn to Chapter 2 if you'd like help with the
Sonos Digital Music System User Guide
→
Zone Setup.