Sonos ZonePlayer ZP100 User Manual page 22

2-8
The Mute indicator (green) and the ZonePlayer Status indicator (white) will begin to
flash. (If this ZonePlayer was previously connected to another Sonos Digital Music
System, the ZonePlayer Status indicator may light solid white instead.)
Choose one of the following options and then follow the on-screen instructions:
4.
• Use the Sonos Controller to add the ZonePlayer by selecting System
→
Settings Add a ZonePlayer from the Music menu.
• Use the Desktop Controller software for Windows to add the ZonePlayer by select-
→
ing Zones Zone Setup
• Use the Desktop Controller software for Macintosh to add the ZonePlayer by se-
lecting Set Up Zones
During the setup process, you will be asked to press and release the Mute and Volume
Up buttons simultaneously on the ZonePlayer you are adding to the Sonos Digital
Music System.
• You may release the buttons as soon as the Mute indicator (green) and the Zone-
Player Status indicator (white) start to blink alternately (this takes approximately
one second).
• When the ZonePlayer has been successfully added, the Mute indicator will go
out and the ZonePlayer Status indicator will change to solid white.
→
Add.
→
Add from the Zones menu.
Sonos Digital Music System User Guide