Renaming A Zoneplayer - Sonos Digital Music System User Manual

2-6
Attach the supplied power cord to your ZonePlayer and plug into a wall outlet.
4.
The Mute indicator and the ZonePlayer Status indicator will begin to flash. (If this
ZonePlayer was previously connected to another Sonos Digital Music System, the
ZonePlayer Status indicator may light solid white instead.)
Mute; flashes green
Status Indicator; flashes white
Choose one of the following options:
5.
• Use the Desktop Controller to add the ZonePlayer to your Sonos Digital Music
System by selecting Zones>Set Up Zones>Add.
Or,
• Use a Sonos Controller to add the ZonePlayer to your Sonos Digital Music System
by selecting System Settings
During the setup process, you will be asked to press and release the Mute and Volume
Up buttons simultaneously on the ZonePlayer you are adding to the Sonos Digital
Music System.
• You may release the buttons as soon as the Mute indicator (green) and the
ZonePlayer Status Indicator (white) start to blink alternately (this takes ap-
proximately 1 second.)
• When the ZonePlayer has been successfully added to your music system, the
Mute indicator will go out and the ZonePlayer Status indicator will change to
solid white.

Renaming a ZonePlayer

If you name a ZonePlayer incorrectly, or if you move your ZonePlayer to another room,
you can rename it to suit your preference.
To rename using Desktop Controller software
From the Zones menu, click Set Up Zones.
1.
Chapter 2: ZonePlayer Setup and Operation
>
Add a ZonePlayer from the Music menu.