Table of Contents
Advertisement
6. Enable automatic retrieval of CRLs.
7. Apply the changes.
Client certificate support
Authentication with AVG server can be done through NDIC using client certificates.
Follow these steps to authenticate using client certificates:
1. Indicate whether client certificate authentication is needed for NDIC connection
2. Click Connect.
3. Select the certificate in the MSCAPI window.
4. If secondary authentication is not required, then you can connect using Net
5. If secondary authentication is required, then AVG extracts the user name. The user
6. Enter the password in the NDIC login screen.
7. Click Connect.
User Guide
cacert
>> Automatic CRL#
""
Current value:
Enter certificate numbers (separated by comma):
ena
>> Automatic CRL#
When using the apply command the first time after having enabled automatic
retrieval of CRLs, a first retrieval is invoked immediately. After that, retrievals will
occur at the specified time interval (where the default value is once every 24
hours).
profile.
If connection is required, then NDIC hides the user name and password fields and
replaces it with a message indicating, client certificate is required to connect.
The MSCAPI window appears.
Direct.
name will be based on 'useroid' in AVG.
The NDIC login screen is displayed with disabled pre-filled user name.
Client certificate support
April 2013
115
Advertisement
Table of Contents
