Table of Contents
Advertisement
Upgrading the AVG Software
2. At the Software Management# prompt, enter:
3. After having logged in again, verify the new software version:
72
User Guide
The downloaded software upgrade package is indicated with the status unpacked.
The software versions can be marked with one out of four possible status values.
The meaning of these status values are:
• unpacked means that the software upgrade package has been downloaded
and automatically decompressed.
• permanent means that the software is operational and will survive a reboot of
the system.
• old means the software version has been permanent but is not currently
operational. If a software version marked old is available, it is possible to switch
back to this version by activating it again.
• current means that a software version marked as old or unpacked has been
activated. As soon as the system has performed the necessary health checks,
the current status changes to permanent.
To activate the unpacked software upgrade package, use the activate
command.
>> Software Management#
Confirm action 'activate'? [y/n]:
Activate ok, relogin<you are logged out here>
Restarting system.
login:
Note:
Activating the unpacked software upgrade package may cause the command line
interface (CLI) software to be upgraded as well. Therefore, you will be logged out
of the system, and will have to log in again. Wait until the login prompt appears.
This may take up to 2 minutes, depending on your type of hardware platform and
whether the system reboots.
boot/software/cur
>> Main#
Version
-------
9.0.0
permanent
5.1.5
Comments? infodev@avaya.com
activate 9.0.0
y
Name
----
SSL
SSL
Status
------
old
April 2013
Advertisement
Table of Contents
