Chapter 20 Introducing The Smt; Introduction To The Smt; Accessing The Smt Via The Console Port; Initial Screen - ZyXEL Communications Prestige 2602HW Series User Manual

This chapter explains how to access and navigate the System Management Terminal and gives

20.1 Introduction to the SMT

The Prestige's SMT (System Management Terminal) is a menu-driven interface that you can
access from a terminal emulator through the console port or over a telnet connection. This
chapter shows you how to access the SMT menus via console port, how to navigate the SMT
and how to configure SMT menus.

20.2 Accessing the SMT via the Console Port

Make sure you have the physical connection properly set up as described in the Quick Start
Guide.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
• VT100 terminal emulation.
• 9600 Baud.
• No parity, 8 data bits, 1 stop bit, flow control set to none.

20.2.1 Initial Screen

When you turn on your Prestige, it performs several internal tests as well as line initialization.
After the tests, the Prestige asks you to press

Chapter 20 Introducing the SMT

C
H A P T E R
Introducing the SMT
[ENTER] to continue, as shown next.
Prestige 2602HW Series User's Guide
an overview of its menus.
2 0
225