Configuring Static Dhcp; Figure 22 Lan: Static Dhcp; Table 13 Lan: Static Dhcp - ZyXEL Communications Prestige 2602HW Series User Manual

Prestige 2602HW Series User's Guide

5.7 Configuring Static DHCP

This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your Prestige's static DHCP settings, click LAN, then the Static DHCP tab. The
screen appears as shown.

Figure 22 LAN: Static DHCP

The following table describes the labels in this screen.

Table 13 LAN: Static DHCP

LABEL
#
MAC Address
IP Address
Back
Apply
Cancel
80
DESCRIPTION
This is the index number of the Static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
This field specifies the size, or count of the IP address pool.
Click Back to return to the previous screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
Chapter 5 LAN Setup