D.AUDIO
D.AUDIO
42
Adjusting the Digital Audio Player Input Level
Use the procedure below to adjust the input level for the external
component connected to the [D.AUDIO IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
1
1
Press the [D.AUDIO] key.
2
2
Press the [MODE] key.
3
3
Select "INPUT LEVEL".
Press the [C] or [D] key.
Press the [ENTER] key.
4
4
Adjust the Input Level.
Press the [A] or [B] key.
Press the [ENTER] key.
z
If you adjust the input level for D.AUDIO, the output level from the
[AUX REC OUT] terminal will also change.
z
You can adjust the input level
in a range from -3 to +5.