JVC UX-J51 Instructions Manual page 58

Setting the Timer
58
12 12
Press the power [
z
The [STANDBY/TIMER] indicator on the main unit lights orange.
z
If the indicator lights red, set the clock to the correct time.
„
To turn a timer off or on
z
When the system is turned on, press the [TIMER] key.
The setting changes each time you press the [TIMER] key.
1 lit
PROG. 1 on
1 2 unlit
Timer off
z
The [STANDBY/TIMER] indicator will light red if there was
a power failure or the system was unplugged from the wall
outlet for some time. If this happens, set the system clock
to the correct time again. (P.60)
z
To modify the program settings, reconfigure the timer settings from
the beginning or press [C] to go back to the previous setting.
z
When the system is in Standby mode, you can confirm the timer
setting (on or off ) for 5 seconds by pressing the [F] key on the remote
control.
] key to turn the power OFF.
2 lit
PROG. 2 on
1 2 lit
PROG. 1 and 2 on