L2Tp - D-Link N300 User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
My Internet Select L2TP.(Username/Password) from the drop-down menu.
Connection:
Enable
Advanced Domain Name System (DNS) services enhances your
Advanced DNS
Internet performance by getting you the information and web
Service:
pages you are looking for faster and more reliably. In addition,
it improves your overall Internet experience by correcting many
common typo mistakes automatically, taking you where you
intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability,
reliability, functionality and operation of the Advanced DNS service
or its features.
Enable True
Check to enable true Gigabit routing. This will increase the
Gigabit Routing
through-put of the WAN-LAN connectivity of the router.
Connectivity:
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet
Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway:
Enter the Gateway IP Address provided by your ISP.
L2TP Server IP:
Enter the Server IP provided by your ISP (optional).
D-Link DIR-636L User Manual
Internet Setup

L2TP

35