D-Link N300 User Manual page 67

Section 3 - Configuration
My IPv6 Connection: Select Autoconfiguration. (Stateless/DHCPv6) from the
drop-down menu.
IPv6 DNS Settings: Select either Obtain.DNS.server.address.automatically or
Use.the.following.DNS.Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.
Enable
Check to enable the Autoconfiguration feature.
Autoconfiguration:
Select Stateful. (DHCPv6), SLAAC. +. RDNSS or SLAAC. +.
Autoconfiguration Type:
Stateless.DHCPv6.
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your
Start: local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your
End:
local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-636L User Manual
Autoconfiguration
63