Manual Setup - D-Link N300 User Manual

Section 2 - Installation
1. Turn off and unplug your cable or DSL broadband modem. This is required.
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.
D-Link DIR-636L User Manual

Manual Setup

Modem
Computer
USB
WPS
1
2
3
4
INTERNET
POWER
DIR-636L
9