L2Tp; L2Tp Server - D-Link DWM-312 User Manual

4g lte m2m router

Hide thumbs Also See for DWM-312:

Table of Contents

Section 4 - Con guration

Check this box to enable the DWM-312's internal L2TP server. If

Server Setup:

enabled, the following options will appear:

Select one or more authentication types for the server, either PAP,

Authentication

CHAP, MS_CHAP, or MS_CHAP2. Note that PAP and CHAP are

Type:

not compatible with encryption.

Enter the address assigned to the server within the VPN. This will

Server Virtual IP:

dictate the IP pool for clients.

Input the starting address for the server's IP pool, from 1 to 254.

IP Pool Start

Address:

Input the end address for the server's IP pool from 1 to 254. Note

IP Pool End

that this number must be higher than the start address.

Address:

Check this box to enable L2TP encryption.

Encryption:

Specify the length of the encryption key.

Encryption

Length:

Up to 5 user accounts can be created for VPN access. Specify the

User Account

user names and passwords that will be used to connect to the

Setting:

VPN server. Note that user names and passwords are visible to any

administrator.

D-Link DWM-312 User Manual

L2TP

Table of Contents