Asus UP-895MD Series User Manual page 130

SATA Support [All Devices]
[All Devices]
[Hard Drive Only]
[Boot Drive Only]
USB Support [Partial Initialization]
[Disabled]
[Full Initialization]
[Partial
Initialization]
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These
settings only apply when Fast Boot is enabled.
[Auto]
[Full Initialization]
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
3-52
All devices connected to SATA ports are available during POST.
This process extends the POST time.
Only hard drives connected to SATA ports are detected during
POST.
Only boot drives connected to a SATA ports are detected during
POST.
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only USB ports with keyboard and
mouse connections will be detected.
For a faster POST time, PS/2 devices will only be available
when the system boots up or rebooted when the PS/2 devices
have not been reconnected or changed. If you disconnect
or change PS/2 devices before restarting the system, PS/2
devices will not be available and BIOS setup program will not be
accessible via PS/2 devices.
For full system control, PS/2 devices will be available during
POST at any circumstances. This process will extend POST
time.
For the fastest POST time, all PS/2 devices will not be available
until your computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Chapter 3: BIOS setup