System Information Menus; Help Menu - GE KTD-405 User Manual

46 KTD-405/KTD-405A/KTD-405-2D Controller Keypad
User Manual

System information menus

In standard Digiplex mode, holding mon at the normal operating menu displays three system information
menus. These menus show the keypad's address, version, and system size setting. Use
through these menus. To exit the system information menus, press
Figure 58. Maximum values
Maximum number of monitors
Maximum number of cameras
Numbers shown are for system controllers; for Digiplexes, the camera maximum is 1023 and the monitor maximum is 128.

Help menu

The HELP menu lets you determine the function associated with each key.
To display the HELP menu (Figure 59), at the normal operating display, press and hold the esc key, then press
the mon key. Release both keys.
Figure 59. HELP menu
To display a key's default function, at the HELP menu, press the key. To display a key's shifted (secondary)
function, press esc and the key. (See Table 3 on page 38 for a list of keys and their default assignments for
normal and shifted functions.)
The help menu times out in ten seconds. To force an exit, press
Maximum number of recorders
Maximum number of multiplexers
Highest preset
Lowest user-programmable preset (quick set)
CAM MN MX RC PS
QS MO AT
HELP MODE:
ENTER=EXIT
.
and
from the first menu or press esc.
Monitor offset
Annunciation and tone
to navigate