Standard Digiplex Mode; System Information Menus; Help Menu - GE KTD-405 User Manual

32 KTD-405 Keypad
User Manual

Standard Digiplex mode

When you provide power to the unit, the normal operating display appears (Figure 41), showing the current
camera number and the current monitor number.
Figure 41. Normal operating display
CAMERA 0
MONITOR 1

System information menus

In standard Digiplex mode, holding mon at the normal operating menu displays three system information
menus. These menus show the keypad's address, version, and system size setting. Use
through these menus. To exit the system information menus, press
Figure 42. Maximum values
Maximum number of monitors
Maximum number of cameras
Numbers shown are for system controllers; for Digiplexes, the camera maximum is 1023 and the monitor maximum is 128.

Help menu

To display the HELP menu (Figure 43), at the normal operating display, consecutively press, briefly hold, and
release the esc and mon keys.
Figure 43. HELP menu
HELP MODE:
PRESS KEY
To display a key's default function, at the HELP menu, press the key. To display a key's shifted (secondary)
function, press esc and the key. (See Table 3 on page 30 for a list of keys and their normal and shifted
functions.)
The help menu times out in ten seconds. To force an exit, press
Maximum number of recorders
Maximum number of multiplexers
CAM
7999 255 32 32 63 58 00
ENTER=EXIT
-> SEE FUNCTION
Highest preset
MN MX RC PS QS MO AT
and
from the first menu or press esc.
Lowest user-programmable preset (quick set)
Monitor offset
Annunciation and tone
W
.
to navigate